Are you looking for comprehensive information on how to clean your agricultural equipment? We’ve got you covered. This guide offers a detailed walk-through on the best practices for maintaining your agri-gear in top condition. We’ll discuss the use of high-pH (alkaline) detergents, the benefits of foamers, high-pressure rinsing techniques, and a lot more. Let’s get started!
The Basics of Cleaning Agricultural Machinery
It’s important to note that most large agricultural machinery can be efficiently cleaned using a high pH (alkaline) detergent. This is usually paired with a specialized foamer to apply the cleaning agent and a high-pressure rinse to remove the dirt.
To tackle those stubborn mud clumps, use a high-pressure rinse before you start the cleaning process. For optimal results, ensure that the chemicals are applied to a dry surface.
Effortless One-Step Touchless Cleaning
Looking for a hassle-free cleaning method? Here’s a simple, one-step touchless cleaning procedure you can follow:
- Initial Preparation: Clean your agricultural equipment from front to back. For efficient cleaning, divide the machinery into small vertical sections, typically 8-10 feet wide.
- Chemical Application: Apply a high pH (alkaline) detergent to the surface of the equipment using a foamer. Start the foam application from the bottom and gradually move toward the top.
- Dwell Time: Allow the cleaning agent to sit on the equipment for a short dwell time of 45-60 seconds. If you’re doing this outdoors, ensure the chemical doesn’t dry on the equipment’s surface.
- High-Pressure Rinse: Rinse the equipment using warm water (90°F – 100°F) from top to bottom. Keep the high-pressure nozzle within 18 inches from the surface at a spray angle of 15° – 45°.
- Repeat the Process: Follow steps 1-4 until your agricultural equipment is thoroughly cleaned.
Cleaning Agricultural Equipment: FAQs
What dilution strength do you recommend? We advise starting the high pH (alkaline) detergent at a strength of 1:20 for effective cleaning.
What happens if the chemical dries on the equipment? If the cleaning agent dries on the surface, it may result in streaks on the machinery.
Can I use a debugger product? Absolutely! Apply them on areas with insect residue as a pre-treatment and continue with your one-step or two-step cleaning without rinsing.
Remember, regular and effective cleaning can extend the lifespan of your agricultural equipment, improving its performance and efficiency. Always consult your chemical supplier for products best suited for your cleaning needs.
For more information about Midwest Power Washing or to get a free quote for agriculture equipment cleaning services, visit our website https://powerwashmidwest.com/ or call us at 715-214-5892. We strive to be the best agriculture equipment cleaning service in Eau Clarie, WI. You can trust Midwest Power Washing to always provide satisfaction and guaranteed agriculture equipment cleaning services.